Performance Test Configuration

 Performance Test Configuration
Processor(s): AMD Athlon XP 3200+ (400MHz FSB)
RAM: 2 x 256MB Corsair PC3200 TwinX LL (v1.1) Modules (SPD rated at CAS 2-2-2-6)
Hard Drive(s): Western Digital 120GB 7200 RPM Special Edition (8MB Buffer)
Bus Master Drivers: NVIDIA nForce version 2.03 (January 30, 2003)
VIA 4in1 Hyperion 4.47 (May 20, 2003)
Video Card(s): MSI GeForce4 Ti 4600 (AGP 4X)
Video Drivers: NVIDIA Detonator 44.03 (May 14, 2003)
Operation System(s): Windows XP Professional SP1
Motherboards: Epox 8KRA2+ (KT600) @ 202.44MHz FSB
Gigabyte 7NNXP (nForce2 Ultra 400) @ 202.77MHz FSB

All performance tests run on nForce2 Ultra 400 motherboards utilized two 256MB Corsair TwinX LL PC3200 (v1.1) modules set to CAS 2-2-2-5 timings in dual channel DDR400 mode. All performance tests run on the KT600-based 8KRA2+ utilized the two Corsair modules listed in the chart above with the following performance settings:

DDR400 Timings
(2/3 banks populated)
Clock Speed: 200MHz
Timing Mode: Ultra
CAS Latency: 2.0
Bank Interleave: 4-bank
RAS to CAS Delay: 2T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: 1T

  • AGP fast write enabled
  • AGP Aperture set to 128MB
Gigabyte 7NNXP: Tech Support and RMA Content Creation & General Usage Performance
Comments Locked

29 Comments

View All Comments

  • Anonymous User - Tuesday, July 8, 2003 - link

    Yes, uhm, can we go back to GIF? I hate Flash. Look, I'm on dialup, and I'm lagged a LOT by big downloads, but I still prefer GIFs to Flash (which seems to load a tad faster). My friends all agree, and most of them are dialuppers too. Please, at least put up a poll or something so you can see how we all really feel about this stupid Flash stuff.
  • NovaPolice - Monday, July 7, 2003 - link

    It looked very good on paper but it hated every brand of ddr I had on hand. I went through a couple gigs of sticks before deciding to send it back.
  • Anonymous User - Monday, July 7, 2003 - link

    I have tested both this board, and the MSI K7N2Delta. The MSI board was FAR MORE stable, and a bit (7%) faster. I wonder why in this test the Gigabyte board is compared with an EPOX via board: Just to let it outperform, which is otherwise not possible?
  • Anonymous User - Monday, July 7, 2003 - link

    They say that CPU voltage is adjustable only up to 1.85v and that chipset voltage is adjustable by 5, 7.5 or 10%. I believe this to be wrong however. What the reviewer believes to be chipset voltage is actually CPU voltage also!! Check out the review over at Digital Daily and they show how voltage up to 2.035v is possible using a combination of these 2 seperate CPU voltage controls! Quite a large difference and large overlook by the reviewer.
  • WooDaddy - Monday, July 7, 2003 - link

    Evan, are you or anyone at Anandtech going to discuss the differences between the Ultra 400 and the standard nForce 2 chipsets? Maybe a general review with reference boards? Is there a big performance difference or limiting factor for future upgrades?
  • Anonymous User - Monday, July 7, 2003 - link

    The review does not include information on the presence of Heat Sink Mounting Holes. Suggestion, add info on mounting holes or lack of to all motherboard reveiws.
  • Anonymous User - Monday, July 7, 2003 - link

    It appears that the performance test results in the Gigabyte 7NNXP review are presented in Macromedia Flash Player 6.

    This is unfortunate, since I am among the many web users who dislike the Flash format, and resent the numerous pop-up "ads" requesting that version 6 be installed.

    I regret that I will be unable to view these results, to find out what additional complexities required them to be displayed in Flash, rather than a standard, multi-platform/browser form such as GIFs. And I hope that this is not an indication that future results will be Flash-formatted, since I am a frequent AnandTech reader and will miss whatever informative content is Flashed.

    Thanks.
  • Anonymous User - Sunday, July 6, 2003 - link

    The Anandtech review claims Gigabyte replied in 33 hours..

    I Wonder who in Gigabyte Should I contact ,Or what e-mail address i should mail to,
    To get a Reply in ANY time frame.
  • CrystalBay - Sunday, July 6, 2003 - link

    Nice evaluation...However perhaps the six phase power DMS prolongs the overall life of these boards, rather than inherently more stable overclocking...Replacing a board thirteen months, two or three years down the line (If lucky) is common place...

    I like to see more board makers produce the bare bones 400's like Solteks NV400-64L...Why because these boards can be thrown away once a year or so...

Log in

Don't have an account? Sign up now