DFI LANParty UT nF3 250Gb: Features and Layout


 DFI nF3 250Gb Motherboard Specifications
CPU Interface Socket 754 Athlon 64
Chipset nVidia nForce3-250Gb
Bus Speeds 200MHz to 456MHz (in 1MHz increments)
PCI/AGP Speeds 66MHz to 100MHz (in 1MHz increments)
Core Voltage Auto, 0.8V to 1.55V in .025V increments
plus Vid Special multiplier of 4%, 10%, 13%, 23%, 26%, 33%, 36% - TO 2.1V
DRAM Voltage Auto, 2.5V to 3.1V in 0.1V increments
(to 3.3V with future BIOS)
AGP Voltage 1.5V-1.9V in 0.1V increments
Chipset Voltage 1.6V-1.9V in 0.1V increments
Hyper Transport Ratios Auto, 1x, 1.5 x, 2 x, 2.5 x, 3 x, 4 x, 5 x
CPU Ratios Auto, 4.0x to 20.0x in 0.5X increments
DRAM Speeds Auto, 100, 120, 133, 140, 150, 166, 180, 200
Memory Slots Three 184-pin DDR Single-Channel Slots
Unbuffered Non-ECC Memory to 2GB Total
Expansion Slots 1 AGP 8X Slot
5 PCI Slots
Onboard SATA 4-Drive SATA by nF3-250Gb
Onboard IDE Two Standard nVidia ATA133/100/66
(4 drives)
SATA/IDE RAID 4-Drive SATA Plus 4-Drive IDE can be combined in nVidia RAID 0, 1, 0+1, JBOD
Onboard USB 2.0/IEEE-1394 8 USB 2.0 ports supported by nF3-250Gb
2 1394A FireWire ports by VIA VT6307
Onboard LAN 1 Gigabit Ethernet on-chip
by nF3-250GB and Marvel PHY
Onboard Audio Realtek ALC850 8-Channel with UAJ
SPDIF coaxial in and out
BIOS Award 8/27/2004

We recently did an in-depth review of the DFI in DFI LANParty UT nF3-250Gb: Overclocker's Dream. We have included the tables of features and the DFI photo for easier comparison of the 3 boards. You should refer to the review for detailed information about the DFI LANParty UT nF3-250Gb.



Soltek K8AN2E-GR: Overclocking and Stress Testing DFI LANParty UT nF3 250Gb: Overclocking and Stress Testing
Comments Locked

39 Comments

View All Comments

  • Staples - Tuesday, September 14, 2004 - link

    I bought a 3200+ system a week ago and this Soltek board. I am glad to see that incomparison, this board's performance fairs really well. There is a big thread here and it seems quite a few people are experiencing various problems with it. Myself included. I think any potential buyer who is inticed by the cheap price might want to check it out before deciding on this one.
  • Illissius - Tuesday, September 14, 2004 - link

    Excellent review, and excellent boards. The only nitpick I have is that you say the three boards are constantly trading performance leads in the stock benchmarks; in reality, the Asus K8N-E and Soltek K8FNAEDKJL:DSGKJ3 trade wins and the DFI is usually behind them, where by a larger, where by a smaller margin, except for the Far Cry test where it manages to squeak a win by a fraction of a FPS.
    The DFI board is damn near perfect. There are only three minor problems with it: (1) The various stuff on the board that is glaring yellow is not blue instead; (2) It is not Abit; (3) It's slightly slower at stock speeds than the Asus and Soltek. Otherwise it's completely perfect, if I were buying a board right now it would absolutely be the one I'd choose.
    One topic I'd like to see touched upon is support for mobile/DTR processors; mobiles AXPs were hugely succesful overclockers, but the mobile A64s are held back by almost universally substandard motherboard support for them. A 35W (1.2V) Mobile 2800+ coupled with the Lanparty UT would be pretty amazing, if it worked.
  • DoobieOnline - Tuesday, September 14, 2004 - link

    Hey Wesley, that's weird that you couldn't get to 9x250 with a SATA drive on the Soltek. I'm using that board and running 10x250 with a 74GB Raptor on NVIDIA SATA 1. It's a great board for under $100! - doobie
  • devonz - Tuesday, September 14, 2004 - link

    Just a thought. When you review memory modules you untimately produce comparison charts of the top overclocked performance of the modules. Why not have a set of graphs showing the top overclocked performance of motherboards so we can judge them based on that information too?
  • icarus4586 - Tuesday, September 14, 2004 - link

    It would have been interesting, just as a side-note, to see some tests on the DFI running at CAS 1.5, whether they were here or in the article on that board specifically. I've never seen any board/RAM that can run at 1.5-2-2
  • LocutusX - Tuesday, September 14, 2004 - link

    Regarding the Asus board:

    Wesley, is your A64 a Newcastle/CG revision or Clawhammer/C0? I have absolutely no issues running my Newcastle 3000+ @ 255FSB - it's like a rock. But yeah, I am using PATA.

    Also, note that there is a new BIOS (1005) for the K8N-E which allows usage of 2.8v V_dimm on the 1.05 revision mobos.
  • jensend - Tuesday, September 14, 2004 - link

    I think it would be interesting to see tests of how well different s754 chipsets and boards do with the Paris core Sempron.
  • Wesley Fink - Tuesday, September 14, 2004 - link

    The information in the Soltek Features table has been updated to reflect the latest BIOS values.
  • Gundamit - Tuesday, September 14, 2004 - link

    Price performance ratio is so much stonger for the 754. Thats why I decided to go for the DFI right now. In 6-8 months I'll take another look at the 939.

    The only dissapointment in the article was the fact you ran the 1.5 CAS setting but didn't post any results. Maybe it would have been out of place in a "roundup". BTW- Is still a round-up with only three mobos or cows? Maybe you could run some benchmarks and update the original LanpartyUT review?



  • ceefka - Tuesday, September 14, 2004 - link

    If you haven't bought anything yet: The 754's only real disadvantage I can think of is its upgrade path or non existence thereof. It is still a very good platform. So what if it is limited to 2/3GB of RAM support. There are not many home users with 2GB+ of RAM.

Log in

Don't have an account? Sign up now