Asus P5WD2 Premium: DDR2-1066 and the Promise of 955x SLI
by Wesley Fink on May 11, 2005 12:05 AM EST- Posted in
- Motherboards
Corsair and Asus Reach DDR2-1066
It was clear in our early testing of the Asus P5WD2 Premium that Asus was interested in showing the standout memory performance of their new 955X motherboard. Toward this end, Asus, Corsair and OCZ all worked on low-latency DDR2 memory solutions that would perform well in the P5DW2.OCZ and Corsair both supplied low-latency DDR2-667 512MB DIMM pairs for benchmarking with the Asus P5WD2 Premium.
OCZ supplied PC2-5400 512MB EB rated at 4-2-2-8 at DDR2-667.
Corsair supplied their CM2X512A-5400UL.
It was established quickly that both memories could do DDR2-667 at 4-2-2-4 timings on the P5WD2, so we pushed both to DDR2-800. Both ran with complete stability at DDR2-800, at the still aggressive 4-3-2-4 timings. Since neither memory pair had any problem with DDR2-667 or DDR2-800, all benchmarks were run at both memory speeds. DDR2-667 is the rated speed of 955x memory, and DDR2-800 is the next logical speed rating.
The next memory milestone is DDR2-1066, which is an exact 2:1 ratio with the 3.46EE introduced with the 925XE motherboard (Intel CPU is quad-pumped and memory is Double Data Rate). Intel's Pentium D chips are currently based on 800FSB, but the 955X does support 1066FSB. With this in mind, we mounted an Intel 3.46 Extreme Edition with a 1066 FSB.
We were amazed to find that the Corsair CM2X512A-5400UL could reach DDR2-1066. This yielded a Sandra standard bandwidth of just over 6400 MB/sec. To put this in perspective, this is the first motherboard and memory that we have ever tested capable of running at DDR2-1066. Frankly, 1066 required slower 5-5-5-15 timings at the maximum 2.3V available on the Asus. We also needed to push all chipset and bus voltages to the maximum and set CPU voltage at 1.60V to achieve this milestone.
These compromises are reflected in the unbuffered bandwidth of about 3300 to 3400 MB/s. 1066 was the absolute maximum that we could reach and we would not call that speed 100% stable. However, none of these qualifications take away the remarkable DDR2-1066 milestone that Corsair and Asus have achieved.
The OCZ PC2-5400 took a different approach at the top of the performance curve.
The OCZ reached DDR2-1000 on the Asus P5DW2 Premium, but at faster 5-3-2-4 timings.
This yielded slightly slower Sandra standard scores at about 6200 MB/sec.
However, the unbuffered Sandra scores were higher than Corsair at 3500 to 3600 MB/sec.
We'll leave it to the memory manufacturers to argue which is better, since performance of the Corsair and OCZ is essentially the same on the new Asus P5DW2 Premium. However, no matter how you view the results, Corsair has earned the title of fastest memory speed in this round at DDR2-1066. There is also the advantage of being able to run the 3.46EE processor at the full rated speed of 1066 FSB with the memory running at 1066.
34 Comments
View All Comments
HardwareD00d - Wednesday, May 11, 2005 - link
Wow, 3% increase. That falls within a margin of error.HardwareD00d - Wednesday, May 11, 2005 - link
This article did an excellent job of showing why DDR2 is total crap. Until they can tighten up the timings, DDR533==DDR667==DDR800 pretty much.quicksilverXP - Wednesday, May 11, 2005 - link
Hey,What bios was your board running at? I purchased two recently, and both of them don't have the DDR2-800 option. I noticed you have 7 ratios available while mine only has 5, and only up to DDR2-667. My Bios version is 0124 from the POST screen. Can you help me out?
KristopherKubicki - Wednesday, May 11, 2005 - link
"Heatsink" is one word. If you are describing a general "heat sink" (there is a distinction), then you are talking about something else.Furthermore, fans are in fact considered active cooling. Active cooling by definition is any cooling device that can be disabled/enabled at will. Heatsinks are passive; fans, peltiers, etc are not.
http://www.google.com/search?hl=en&q=define%3A...
Kristopher
Darth Farter - Wednesday, May 11, 2005 - link
well, anyone know where I can find this?what is the msrp for these (dual core) boards, cause those $255/$245 prices on newegg/ZZF are hard to ignore...
fishbits - Wednesday, May 11, 2005 - link
"a fan doesn't actually cool anything, it just pushes air around"Try disabling the fans in your rig and A/C, take temp readings before and after and get back with us. Moving same temp to same temp isn't cooling. Moving cooler air (or water or other) to something that is hotter (chip, compressor, radiator, etc) most definitely actively cools it.
ElFenix - Wednesday, May 11, 2005 - link
heat sink is two wordsfans are not active cooling. air conditioning is active cooling, turning the ceiling fan on in your room is not. a fan doesn't actually cool anything, it just pushes air around.
thanks!
Doughboy - Wednesday, May 11, 2005 - link
My retail package also did not include the WiFi/Tuner and Remote. Still a great board though. :)jonny13 - Wednesday, May 11, 2005 - link
Why the hell is Doom3 listed under DirectX 9 gaming?Someone should tell Carmack that he was actually coding in DirectX 9 and not OpenGL like he thought...
Also, on the third graph of the General Benchmarks, you have the orange color as the Asus P5ND2-SLI instead of the Asus P5WD2 like every other chart. If you are going to use colors for the graphs, at least be consistant.
bob661 - Wednesday, May 11, 2005 - link
#6Hypertransport is an open standard. Neither AMD nor NV owns it.
#10
A64's also use Hypertransport to connect the processor to the northbridge.