Asus A8N32-SLI Deluxe: NVIDIA Dual x16 for the Athlon 64
by Wesley Fink on November 6, 2005 9:00 AM EST- Posted in
- Motherboards
Overclocking: Asus A8N32-SLI Deluxe
The Asus A8N32-SLI set a new stock speed overclock record with this CPU at 246. This is likely a result of the excellent 8-phase power regulation of the Asus board, which greatly contributes to cool operation – even when pushed hard.
Lowering the multiplier to reach the highest CPU clock also yielded excellent performance – at 310 among the highest that we have tested. This Asus has an outstanding assortment of memory timing and voltage adjustments for overclocking, but they are somewhat unfamiliar. Given more time with this board, it is likely that we could achieve even higher reduced multiplier timings as we become more familiar with the memory adjustments. In general, the HyperTransport performs well when left on Auto, letting the board handle the HTT adjustments.
Other top overclockers like the DFI nForce4 series have extensive adjustments for tRef and Driving Strength. Best overclocking performance is often achieved on the DFI by reducing DDR Driving Strength with Samsung TCCD. The Asus has more limited Driving Strength and tRef adjustments, but it offers an extremely wide range of DDR Skew adjustments, which are missing from many enthusiast boards. The point is that Asus has taken a little different approach to controls, and it will take time to learn what works best with the available memories.
Asus also offers full Auto settings for those who do not wish to delve deeply into the BIOS for overclocking. There are even Auto Overclocking options in the BIOS where the board will set all parameters for best overclocking. These work well, but like other Auto OC options, the Asus can be pushed furthest with intelligent manual overclocking.
We were really unprepared for what a great overclocker the Asus turned out to be. The dual x16 is about graphics, and we really didn’t expect the excellent overclocking that this board delivers. It should be pointed out, however, that best overclocks are achieved with a single video card. While we reached 310x9 with a single 7800GTX, the best OC that we could achieve with a 7800GTX SLI setup was about 275.
Asus A8N32-SLI Deluxe Overclocking Testbed | |
Processor: | Athlon 64 4000+ (2.4GHz, 1MB Cache) |
CPU Voltage: | 1.45V (default 1.40V) |
Cooling: | Thermaltake Silent Boost K8 Heatsink/Fan |
Power Supply: | OCZ Power Stream 520W |
Memory: | OCZ PC3200 Platinum Rev. 2 (Samsung TCCD Memory Chips) |
Hard Drive: | Seagate 120GB 7200RPM SATA 8MB Cache |
Maximum OC: (Standard Ratio) |
246x12 (Auto HT, 2.5-3-3-7) 2952MHz (+23%) |
Maximum FSB: (Lower Ratio) |
310 x 9 (3x HT, 1T) (2790MHz, 2 DIMMs in DC mode) (+55% Bus Overclock) |
The Asus A8N32-SLI set a new stock speed overclock record with this CPU at 246. This is likely a result of the excellent 8-phase power regulation of the Asus board, which greatly contributes to cool operation – even when pushed hard.
Lowering the multiplier to reach the highest CPU clock also yielded excellent performance – at 310 among the highest that we have tested. This Asus has an outstanding assortment of memory timing and voltage adjustments for overclocking, but they are somewhat unfamiliar. Given more time with this board, it is likely that we could achieve even higher reduced multiplier timings as we become more familiar with the memory adjustments. In general, the HyperTransport performs well when left on Auto, letting the board handle the HTT adjustments.
Other top overclockers like the DFI nForce4 series have extensive adjustments for tRef and Driving Strength. Best overclocking performance is often achieved on the DFI by reducing DDR Driving Strength with Samsung TCCD. The Asus has more limited Driving Strength and tRef adjustments, but it offers an extremely wide range of DDR Skew adjustments, which are missing from many enthusiast boards. The point is that Asus has taken a little different approach to controls, and it will take time to learn what works best with the available memories.
Asus also offers full Auto settings for those who do not wish to delve deeply into the BIOS for overclocking. There are even Auto Overclocking options in the BIOS where the board will set all parameters for best overclocking. These work well, but like other Auto OC options, the Asus can be pushed furthest with intelligent manual overclocking.
We were really unprepared for what a great overclocker the Asus turned out to be. The dual x16 is about graphics, and we really didn’t expect the excellent overclocking that this board delivers. It should be pointed out, however, that best overclocks are achieved with a single video card. While we reached 310x9 with a single 7800GTX, the best OC that we could achieve with a 7800GTX SLI setup was about 275.
95 Comments
View All Comments
Marlin1975 - Friday, November 4, 2005 - link
That can not be stressed enough. I don't mind paying a couple extra bucks to get a nice VIA Envy sound or even the new C-media Dolby chip. But the ac97 realtek junk needs to die.
phusg - Friday, November 4, 2005 - link
Agreed. Only it's even worse: nVidia pioneered decent on-board sound with their nForce1 chipset (not nForce2).
Concillian - Friday, November 4, 2005 - link
I definitely agree, and don't think this was mentioned in the 'Final Words'.With lack of PCI-e support from soundcards and many other add-in cards, it's important to minimize add-in cards, especially on an SLI setup where slots may be eaten up by coolers for the 2 video cards.
With the way this board is layed out, if you have 2 cards in SLI with big coolers you have 1 PCI and 1 x4 PCI-e slot left. If you're forced to populate the PCI slot with a soundcard you're done... seeing as how there are very few PCI-e cards out there.
I would also not be blaming nVidia... ASUS could implement a better audio solution if they wanted to (like DFI does with Karajan and MSI does with SBLive!), but they chose not to. To blame nVidia seemingly absolves ASUS of responsibility, and that's not right. The board is made by ASUS, not nVidia. Any blame for a poor audio implementation belongs to ASUS.
nVidia supposedly had little demand for soundstorm because motherboard manufacturers weren't ordering enough. At least that's the story that was fed to us. Giving specific manufacturer designs poor ratings because of crappy audio implementation is the way to get manufacturers to implement better solutions regardless of what their supplier gives them. Blaming their supplier gives them a cop out. Blaming ASUS gets them looking for innovative solutions and asking nVidia to supply them with better options integrated into future chipsets.
phusg - Friday, November 4, 2005 - link
Also the motherboard manufacturers complained at the high cost of the Dolby Digital Live licence (something like $5 a chipset if I remember rightly). I've always said nVidia should go have a chat with the competitors DTS. Wouldn't that be something?
DanaGoyette - Friday, November 4, 2005 - link
I've been pondering this for a while:Since the nForce4 x16 northbridge uses Hypertransport to communicate with its southbridge,
and the nForce2 southbridge uses HyperTransport to communicate with its northbridge,
Shouldn't it be possible to replace or supplement the nForce4 southbridge with the nForce2 MCP-T and use its APU? Either that, or combine it with the nForce Professional MCPe?
Even better, use the nForce2 MCP-T with the GeForce 6100/6150 northbridge for integrated audio and video!
psychobriggsy - Friday, November 4, 2005 - link
It all depends on whether the southbridge used (a standard nForce4 SLI) has a downstream HyperTransport link.I imagine it doesn't, therefore you have: [CPU]===[nF SP100]===[nF SLI]
I suppose you could connect an ULi PCIe southbridge to a couple of spare PCIe lanes for it's built in Azalia audio, and another bazillion SATA ports, IDE ports and USB ports, lol.
DanaGoyette - Friday, November 4, 2005 - link
Er, I didn't mean nForce Professional AND nf4 with the MCP-T, I meant one or the other. I wonder if it's even possible to use the NF2 southbridge like this. I believe the BIOS might take some work, but you never know until you try![CPU] - [nF Pro] - [NF2 MCP-T]
[CPU] - [SLIx16] - [NF2 MCP-T]
[CPU] - [gf6100] - [NF2 MCP-T]
yacoub - Friday, November 4, 2005 - link
This board is definitely on my list to track pricing. If this thing comes down enough I'll be getting this when I build my new system instead of the older Asus SLI-Premium I was looking at.Hopefully Asus soon releases that sweet passively-cooled 7800series card (hopefully a GT) as well. It debuted in this article: http://www.anandtech.com/tradeshows/showdoc.aspx?i...">http://www.anandtech.com/tradeshows/showdoc.aspx?i...
yacoub - Friday, November 4, 2005 - link
Can you mount an XP-90 on the processor without interfering with the heatpipes or MOSFETs around the socket?yacoub - Friday, November 4, 2005 - link
Did you guys test any of the aftermarket cooling systems like the XP90 and XP120 for clearance? That's rather important to overclockers, especially on a board like this!