Memory Performance

Memory Bandwidth Comparison - Read Performance

Memory Bandwidth Comparison - Write Performance

Memory Bandwidth Comparison - Latency Performance

We recently switched to version 2.50 of Everest, so these scores are not comparable to previous tests with version 2.20. The memory latency test shows a slight advantage over the nForce4 boards, but the read and write performances of the ULi and ATI based solutions are impressive and accounts for their performance advantages in memory intensive applications.


Overclocking Performance

The overclocking performance graphs have been added to the standard benchmark test suite and should allow for a better comparison on the overclocking capabilities of tested boards. For more details on the specific overclocking abilities of this board, please refer to the Overclocking and Memory Stress Test section in the Basic Features section.

Overclocking - A64 4000+ - (San Diego)

Overclocking - A64 4000+ - (San Diego)

The EPoX EP-9U1697 GLi is a very competitive overclocking platform for a value based performance board. Hopefully, the BIOS that we tested and components on the board are the same as production level boards. Epox has assured us that this is the case.

General Performance & Encoding Gaming Performance
Comments Locked

35 Comments

View All Comments

  • Palek - Wednesday, March 15, 2006 - link

    Gary,

    There is a spelling error in the last sentence of the 1st page:

    "Let's find out how Epox's offering fairs against the competition."

    The correct spelling is "fares" not "fairs".
  • Gary Key - Wednesday, March 15, 2006 - link

    I had corrected it on the final draft and somehow it still made it in. My fault for not catching it once the article went live last night. It is corrected now as are the ascending chart figures.
  • Googer - Wednesday, March 15, 2006 - link

    Is epox part of Shuttle?

    http://local.google.com/local?q=Epox%20EP-9U1697-G...">http://local.google.com/local?q=Epox%20...utf-8&am...
  • Googer - Wednesday, March 15, 2006 - link

    The ULi M1695 is all about upgradeability and the ASrock implementation uses a 20pin PSU where as the Epox implementation needs a 24pin connection. Based on the benchmarks it also looks like you will need to purchase a PCI-e x1 gigabit controller.

    Speaking from experience, my biggest gripe on the ASrock M1695 is the BIOS is very quirky and can be very very slow to POST.

    Epox is the king if you are an overclocker and overall performance is very impressive compaired to the ASrock ULi M1695.

  • Avalon - Wednesday, March 15, 2006 - link

    8Mb throughput? Are you sure that's not a mistake?
    The only comment on Epox's ethernet score was that it was not competitive...700Mb vs 8Mb...I'd say something is wrong, or a typo?
  • Palek - Wednesday, March 15, 2006 - link

    Yeah, I noticed that, too, then I found the missing "9" outside the graph area. The figure is correct, it's just the layout that is messed up.
  • Gary Key - Wednesday, March 15, 2006 - link

    The actual number is 98.9Mb/s. Our graph engine has a small issue with variances that wide. It placed the 9 into the description field. I updated the text statement to reflect this issue. Thank you.
  • Peter - Friday, March 17, 2006 - link

    While you're updating, you might want to correct the research error that the RTL8201 is a "PCI based solution". It is not, it's just a PHY to the ULi chip's integrated 10/100 MAC.

    Oh, and when are you finally going to stop attributing memory performance to chipsets on AMD64?
  • Cygni - Wednesday, March 15, 2006 - link

    Might have to pick one of these up...
  • Rock Hydra - Wednesday, March 15, 2006 - link

    The Epox EP-9U1697 GLi displayed superb stability with 4 DDR2 modules in Dual-Channel operation at the settings of 2-2-2-7, but it required the command rate to be increased to 2T.

Log in

Don't have an account? Sign up now