3D Rendering Performance using 3dsmax 7 & CineBench 9.5

We're looking at 3D rendering performance using two different applications: 3D Studio Max and Cinebench 9.5. Cinebench is a free performance testing utility based off of the CINEMA 4D R8 rendering package. Our scores from 3D Studio Max are a composite score from four rendering tests: CBalls2, SinglePipe2, UnderWater, and 3dsmax5 Rays.

General Performance - 3D Rendering

The Core 2 Extreme leads by 24% in the 3D Studio Max composite score, with performance leads in the individual tests ranging from 20% to 31%. At the lower end of the performance spectrum, the E6300 averages a 9% lead over the X2 3800+ and performs about equal to the 4200+. The margin of victory over the 3800+ ranges from 7% to 12% in the individual results.

General Performance - 3D Rendering

General Performance - 3D Rendering

Moving on to Cinebench, Core 2 Extreme takes the performance crown again, but with a closer margin of victory than in 3dsmax: 14%-15% in SMP and single CPU modes. The Core 2 Duo E6300 barely comes out ahead of the X2 3800+, but the 1%-3% lead is basically a tie.

Application Performance using Winstone 2004 Encoding Performance using DivX 6.1, WME9, Quicktime (H.264) & iTunes
Comments Locked

202 Comments

View All Comments

  • Anand Lal Shimpi - Friday, July 14, 2006 - link

    Corrected, it was a misprint.

    Take care,
    Anand
  • Zorba - Friday, July 14, 2006 - link

    Why is the article talking about how Intel is killing AMD on power consumption when AMD is on the top for both idle and load? If you are doing a performance/watt ratio you need to show that on the graph. This page (page 7) just makes the how article look completely baised.
  • Calin - Friday, July 14, 2006 - link

    Because the EE SFF processors were hard to obtain by Anandtech even for testing purposes. I'm not sure they are available in retail market any more than Conroe is
  • Anand Lal Shimpi - Friday, July 14, 2006 - link

    The Core 2 Extreme X6800 has a performance per watt score of 0.3575 in WME9 compared to 0.2757 for the X2 3800+ EE SFF. I'll put together a performance per watt graph now and see if I can stick it in there.

    Take care,
    Anand
  • Anand Lal Shimpi - Friday, July 14, 2006 - link

    I included the performance per watt scores I mentioned above in the review now, hopefully that will make things a little more clear.

    Take care,
    Anand
  • JarredWalton - Friday, July 14, 2006 - link

    I don't see the chart, Anand - I hope I didn't accidentally overwrite your change. Sorry!
  • MrKaz - Friday, July 14, 2006 - link

    Don't put it because it's a biased chart,

    Why based on WM9 benchmark? Why not one of the others?

    Why put it now, if you never put it when A64 was killing the P4s?
  • coldpower27 - Friday, July 14, 2006 - link

    Because AMD didn't real make a big deal about the performance per watt intiative back in the day. They focused on their price/performance instead.
  • MrKaz - Friday, July 14, 2006 - link

    So?

    Just because Intel focuses now on that Anandtech must be obliged to put it?

    So for you where was the price/performance (A64 vs P4) charts on Anandtech reviews?
  • coldpower27 - Friday, July 14, 2006 - link

    Yeah, due to their making people aware of it, it has now become a issue.

    It was only after Prescott, that we became more aware that thermals were starting to get out of control and paid more attention to wattage numbers.

    Price/Performance is not as hard to calculate.

Log in

Don't have an account? Sign up now