Intel Core 2 Quad Q9550S: A New 65W Quad-Core
by Anand Lal Shimpi on January 27, 2009 8:00 PM EST- Posted in
- CPUs
Adobe Photoshop CS4 Performance
To measure performance under Photoshop CS4 we turn to the Retouch Artists’ Speed Test. The test does basic photo editing; there are a couple of color space conversions, many layer creations, color curve adjustment, image and canvas size adjustment, unsharp mask, and finally a gaussian blur performed on the entire image.
The whole process is timed and thanks to the use of Intel's X25-M SSD as our test bed hard drive, performance is far more predictable than back when we used to test on mechanical disks.
Time is reported in seconds and the lower numbers mean better performance. The test is multithreaded and can hit all four cores in a quad-core machine.
Before we get to performance let's look at idle power consumption:
Now let’s look at performance:
The best performers in this benchmark, by far, are the Core i7 processors. If you’re building the ultimate Photoshop machine, Core i7 is what you want. The entry level Core i7-920 is faster than the Core 2 Extreme QX9770, despite the latter being priced at over $1000.
Note that the Core 2 Quad Q9550S performs identically to a Core 2 Quad Q9500; right in between a Q9650 and a Q9450, just as you’d expect.
Next we measured the average power consumption of the entire machine during the Photoshop benchmark, the results are reported in watts. Lower numbers are better here:
Now we see the benefit of the new -S parts; the Core 2 Quad Q9550S draws less power than any other chip we tested, including the much smaller, cooler running Q9400. While the Q9550S still uses the original 820M transistor Penryn core, the Q9400 is a smaller 456M transistor part.
While we don’t have a real Q9550 to compare to, if you look at the power consumption of the Q9650 and the Q9450 you can estimate that a Q9550 would be somewhere in between - perhaps around 165W. That would put the average energy savings of the 9550S at 10W.
We can also look at the maximum power consumed during the course of the test:
The Q9550S’ advantage amounts to around 15W under peak power draw.
Efficiency is equally important, here we’re looking at total energy consumed by the system over the life of the test. Energy consumed takes into account how long the test takes to complete, which will be shorter on faster machines.
Here the Q9550S is marginally better than its Penryn siblings. There’s about a 5% drop in total energy consumed compared to a Q9650. And this is where the argument for energy efficiency falls short with the Q9550S; look at the total energy consumed on the Core i7, it blows the Q9550S out of the water.
While the Core i7-920 draws as much as 6% more power than the Q9550S, it also completes the benchmark in nearly 14% less time. If you want the best performance per watt, skip the Core 2 Quad Q9550S and buy the Core i7-920.
Facebook
Twitter
RSS
62 Comments
View All Comments
carniver - Wednesday, January 28, 2009 - link
makes sense indeedAffenJack - Wednesday, January 28, 2009 - link
some results look strange like x264Phenom2, q9400 and q9450 have the same speed and same average power.
Shouldn't they have the same total energy comsumption?
I would say there's something wrong in this chart.
xahydra - Wednesday, January 28, 2009 - link
BeHardware reviewed the q9300 awhile back and tested consumption directly from the voltage rail and found it never pulled more than about 45 watts full load. This is consistent with the fact that the q9300 and its q8000 series cousins typically pull about 30W+ less than the q6600. Intels own processor information finder shows identical voltages for the 9300 and this "S" series CPU and the voltages are identical.. Only thing different is the stepping. Could the q9300 have been labeled as a 50W part had Intel cared to do so? Or even a 65W for that matter (giving margin of yield variation)?http://processorfinder.intel.com/details.aspx?sSpe...">http://processorfinder.intel.com/details.aspx?sSpe...
http://processorfinder.intel.com/details.aspx?sSpe...">http://processorfinder.intel.com/details.aspx?sSpe...
philosofool - Wednesday, January 28, 2009 - link
You're right that the Core i7 is overall a more efficient machine. However, the S series are LGA775 chips, which means that could fall into the upgrade path for many users, or simply be the chip of choice for someone interested in an $85 board and power friendly chip. It's the added premium of X58 and triple channel DDR3 memory that sets th Core i7 cost outside of the mainstream, not just the cost of the chip itself. Otherwise I'd be looking at a Core i7 machine right now....7Enigma - Wednesday, January 28, 2009 - link
I have a hard time wrapping my mind around a low(er) TDP part that cannot OC better than a non low TDP-binned processor? Is it just that the one you have for testing is a uniquely "gifted" cpu? It's my understand (correct me if I'm wrong) that lower TDP parts are due to superior construction that reduces leaks that would otherwise just go to heat production. If this is the case I can't see why a lower TDP part couldn't OC higher....Please enlighten me as it doesn't make a lot of sense. Oh and thanks for the review because I'm sure I'm not the only one that just assumed a lower TDP part would on average OC better than a higher TDP part.
JarredWalton - Wednesday, January 28, 2009 - link
Lower power parts can come from a variety of things, but binning is a major impact. In many cases, chips that need less voltage run cooler and OC better; likewise, chips that *can* run with less voltage can also run fine at higher speeds with a "normal" voltage. That puts Intel (and AMD) in the position of binning for several options: do you want a low power chip, a high default MHz chip, or some combination of the two?My guess would be that a lot of the QX9650/QX9770 and similar "extreme" CPUs can run at lower voltages and lower MHz. However, Intel might take CPUs that bin successfully at high clocks first, and then bin the remaining to see if some can run at lower voltage, which could then account for S-series chips that don't OC any better than regular chips.
Also remember that overclocking depends on many areas of the CPU, so it could be that these low voltage chips also tend to have limitations elsewhere -- maximum OC will always depend on the weakest link in the chip, which is why we see variability. Perhaps this being an ES chip has an impact, or it could just be random luck. Good or bad luck, that's the question.
I'm sure some S-series chips will overclock slightly better than regular Penryns, but at the end of the day the last 100-400 MHz really only matters to people running competitive benchmarks. Heck, I'm still running a Q6600@3.30GHz, and I have never encountered any situation where I think, "I wish my CPU had a little more oomph...." YMMV, naturally.
7Enigma - Friday, January 30, 2009 - link
Thank you for the very informative reply! And I agree it should make it into the original article to preempt the inevitable question.StraightPipe - Thursday, January 29, 2009 - link
Thanks. This is a great explaination.I wish it had made it into the main article.
WillR - Wednesday, January 28, 2009 - link
Anand, can you provide any further explanation why Intel’s power gate transistors gave the i7 a higher energy efficiency on the Fallout 3 test in terms of Joules but didn't actually give it a lower "at the wall" power draw in average watts? I'm just not following why it's making any difference in joules when it's not in watts (compared to the P2 940) if the dt is the same.Also, any interest in adding testing of the 50 watt Xeon L5420 to the benchmark database? Intel has had low voltage parts for almost a year, they just haven't brought them into the consumer products until now. For the most part they've been ignored by review sites.
DeepBlue1975 - Wednesday, January 28, 2009 - link
About the temperature advantage, I think the results are not trustworthy enough because there is no software that can accurately measure the absolute temperature of the cores.Even though Intel disclosed the tjunction max spec for their 45nm parts, they also said that the measure is not completely precise because each chip has a different tj max temperature that can not be read from any register.
Only i7's tj max can be obtained directly from the chip, so that the absolute core temperature can be better calculated.
Also on Intel's presentation, they stated that the DTS' readings are not accurate enough for measuring idle temps. Anyway this doesn't apply to this article as you're comparing mainly load temps, not idle ones, and when under load and the more the on die temp approaches tj max, the more accurate the DTS' reading becomes.
And as the Tcase temp is read and by a motherboard's sensor (at least AFAIK from the available Intel's docs), it isn't completely reliable either.
Aside from that, excellent article. Not many sites measure the "performance per watt" factor. The only thing I'd add to this article, is a direct comparison with a non-s 9550 e0 chip, specially in the overclocking department, as I tend to think that "cooler chips" will be actually most wanted by overclockers than by energy savers (mainly considering the high price premium)
Regards.