The SSD Anthology: Understanding SSDs and New Drives from OCZ
by Anand Lal Shimpi on March 18, 2009 12:00 AM EST- Posted in
- Storage
The Return of the JMicron based SSD
With the SSD slowdown addressed it’s time to start talking about new products. And I’ll start by addressing the infamous JMicron JMF602 based SSDs.
For starters, a second revision of the JMF602 controller came out last year - the JMF602B. This controller had twice the cache of the original JMF602A and thus didn’t pause/stutter as often.
The JMicron JMF602B is the controller found in G.Skill’s line of SSDs as well as OCZ’s Core V2, the OCZ Solid and the entire table below of SSDs:
| JMicron JMF602B Based SSDs |
| G.Skill FM-25S2 |
| G.Skill Titan |
| OCZ Apex |
| OCZ Core V2 |
| OCZ Solid |
| Patriot Warp |
| SuperTalent MasterDrive |
All I need to do is point to our trusty iometer test to tell you that the issues that plagued the original JMicron drives I complained about apply here as well:
| Iometer 4KB Random Writes, IOqueue=3, 8GB sector space | IOs per second | MB/s | Average Latency | Maximum Latency |
| JMF602B MLC Drive | 5.61 | 0.02 MB/s | 532.2 ms | 2042 ms |
On average it takes nearly half a second to complete a random 4KB write request to one of these drives. No thanks.
The single-chip JMF602B based drives are now being sold as value solutions. While you can make the argument that the pausing and stuttering is acceptable for a very light workload in a single-tasking environment, simply try doing anything while installing an application or have anti-virus software running in the background and you won’t be pleased by these drives. Save your money, get a better drive.
The next step up from the JMF602B based drives are drives based on two JMF602B controllers. Confused? Allow me to explain. The problem is that JMicron’s next SSD controller design won’t be ready anytime in the near future, and shipping mediocre product is a better option than shipping no product, so some vendors chose to take two JMF602B controllers and put them in RAID, using another JMicron controller.
Two JMF602B controllers and a JMicron RAID controller
The problem, my dear friends, is that the worst case scenario latency penalty - at best, gets cut in half using this approach. You’ll remember that the JMF602 based drives could, under normal load, have a write-latency of nearly 0.5 - 2 seconds. Put two controllers together and you’ll get a worst-case scenario write latency of about one second under load or half a second with only a single app running. To test the theory I ran the now infamous 4K random write iometer script on these “new” drives:
| Iometer 4KB Random Writes, IOqueue=3, 8GB sector space | IOs per second | MB/s | Average Latency | Maximum Latency |
| JMF602B MLC Drive | 5.61 | 0.02 MB/s | 532.2 ms | 2042 ms |
| Dual JMF602B MLC Controller Drive | 8.18 | 0.03 MB/s | 366.1 ms | 1168.2 ms |
To some irate SSD vendors, these may just be numbers, but let’s put a little bit of thought into what we’re seeing here shall we? These iometer results are saying that occasionally when you go to write a 4KB file (for example, loading a website, sending an IM and having the conversation logged or even just saving changes to a word doc) the drive will take over a second to respond.
I don’t care what sort of drive you’re using, 2.5”, 3.5”, 5400RPM or 7200RPM, if you hit a 1 second pause you notice it and such performance degradation is not acceptable. Now these tests are more multitasking oriented, but if you run a single IO on the drive you'll find that the maximum latency is still half a second.
The average column tells an even more bothersome story. Not only is the worst case scenario a 1168 ms write, on average you’re looking at over a quarter of a second just to write 4KB.
The G.Skill Titan has recently garnered positive reviews for being a fast, affordable, SSD. Many argued that it was even on the level of the Intel X25-M. I’m sorry to say it folks, that’s just plain wrong.
One of the most popular dual JMF602B drives
If you focus exclusively on peak transfer rates then these drives work just fine. You’ll find that, unless you’re running a Blu-ray rip server, you don’t spend most of your time copying multi-GB files to and from the drive. Instead, on a normal desktop, the majority of your disk accesses will be small file reads and writes and these drives can’t cut it there.
Some vendors have put out optimization guides designed to minimize stuttering with these JMF602B based drives. The guides generally do whatever they can to limit the number and frequency of small file writes to your drive (e.g. disabling search indexing, storing your temporary internet files on a RAM drive). While it’s true that doing such things will reduce stuttering on these drives, the optimizations don’t solve the problem - they merely shift the cause of it. The moment an application other than Vista or your web browser goes to write to your SSD you’ll have to pay the small file write penalty once more. Don’t settle.
But what option is there? Is Intel’s X25-M the only drive on the market worth recommending? What if you can’t afford spending $390 for 80GB. Is there no cheaper option?
Facebook
Twitter
RSS
250 Comments
View All Comments
strikeback03 - Thursday, March 19, 2009 - link
I understand your point, but I am not sure you understand the point I (and others) are trying to make. The SSD makers (should) know their market. As they seem to be marketing these SSDs to consumers, they should know that means the vast majority are on Vista or OSX, so the OS won't be optimized for SSDs. It also means the majority will be using integrated disk controllers. Therefore, in choosing a SSD controller which does not operate properly given those restrictions, they chose poorly. The testing here at Anandtech shows that regardless of how the drives might perform in ideal circumstances, they have noticeable issues when used the way most users would use them, which is really all those users care about.tshen83 - Thursday, March 19, 2009 - link
In the history of computing, it was always the case that software compensated for the new hardware, not the other way around. When new hardware comes out that obsoletes current generation of software, new software will be written to take advantage of the new hardware.Think of it this way: you always write newer version of drivers to drive the newest GPUs. When is the last time newer GPUs work with older drivers?
Nobody should be designing hardware now that makes DOS run fast right? All file systems (except ZFS and soon BTRFS) are obsolete now for SSDs, so we write new file systems. I am not sure Intel X25-M's approach of virtualizing flash to the likings of NTFS and EXT3 is the correct one. It is simply a bridge to get to the next solution.
SSD makers right now are making a serious mistake pushing SSDs down consumer's throats during an economic crisis. They should have focused on the enterprise market, targeting DB servers. But in that space, Intel X25-E sits alone without competition. (Supertalent UltraDrive LEs should be within 25% of X25-E by my estimation)
pmonti80 - Thursday, March 19, 2009 - link
Now I understand what you meant in the beginning. But still I don't agree with you, the system reviewed is the one 99% of SSD buyers will use(integrated mobo controller + NTFS). So, why optimize the benchmark to show the bad drives in a good light?About the Vertex, I don't understand what you are complaining about. After reading this article most people got the idea that Vertex is a good drive and at half Intel's price (I know, I searched on google for comments about this article).
tshen83 - Thursday, March 19, 2009 - link
Professional people only look at two SSD benchmarks: random read IOPS at 4k and random write IOPS at 4k(Maybe 8K too for native DB pages).The Vertex random write IOPS at 4K size is abysmal. 2.4MB/sec at 4K means it only does 600ish random write IOPs. Something was wrong, and Vista/ICH10R didn't help. The 8GB/sec write boundary Anand imposed on the random write IOPS test is fishy. So is the artificial io queue depth = 3.
The vertex random write IOPS should be better. The random read IOPS also should be slightly better. I have seen OCZ's own benchmark placing the Vertex very close to Intel X25-M at random read/ write IOPS tests.
I personally think that if you use NTFS, just ignore the SSDs for now until Windows 7 RTM. You can't hurt waiting for SSD price to drop some more in the next 6 months. Same thing for Linux, although I would argue that Linux is even in a worse position for SSDs right now than windows 7. EXT3/EXT4/JFS/XFS/REISERFS all suck on SSDs.
gss4w - Thursday, March 19, 2009 - link
Anandtech should adopt the same comment system as Dailytech so that comments that don't make any sense can be rated down. Who would want to read a review of something using a beta OS, or worse an OS that is only used on servers? I think it would be interesting to see if Windows 7 beta offered any improvements, but that should not be the focus of the review.7Enigma - Thursday, March 19, 2009 - link
Here's another vote for the Dailytech comments section. The ability to rate up down, but more importantly HIDE the comments below a threshold would make for much more enjoyable reading.curtisfong - Wednesday, March 18, 2009 - link
Why should Anand test with Windows 7b or *nix? What is the majority OS?Kudos to Anand for testing real world performance on an OS that most use, and to Intel for tuning their drives for it. I'm happy the other manufacturers are losing business..maybe they will also tune their drives for real world performance and not synthetic benchmarks.
To the poster above: do you work for OCZ or Samsung?
Glenn - Wednesday, March 18, 2009 - link
tshen83 "A very thorough review by tshen83, an hour agoBUT, still based on Windows Vista.
"
As long as these drives are marketed toward said OS, why would you not use it? Most of us wouldn't recognize Solaris if we saw it! And I believe you seriously overestimate yourself if your gonna drill anything into Anands head! You might need your own site, huh?
Great Job Anand! Don't forget to remind these CEO's that they also need to provide any software needed to configure and optimize these drives to work properly. ie go to OCZ Forums and try to figure out how to align, optimize and keep your drive running like it's supposed to, in less than 4 hours of reading! It would be nice if these companies would do their own beta testing and not rely on early adopters to do it for them!
Roland00 - Wednesday, March 18, 2009 - link
It was a joy to read all 31 pagesMagicPants - Wednesday, March 18, 2009 - link
Anand it would be really helpful to have a list of SSD companies blacklisting you so I know which ones to avoid. In general it would be nice to know who doesn't provide review samples to reputable sites.