P55 Overclocking Showdown - ASUS, Gigabyte, and EVGA at the OC Corral (Page 6 Updated)
by Rajinder Gill on November 6, 2009 12:00 PM EST- Posted in
- Motherboards
3DMark Vantage
At high processor clock speeds the CPU test of 3DMark Vantage is great at weeding out board weaknesses in power delivery. Along with WPrime 1024M, this test represents one of the toughest loads these boards will be subjected to when benchmarking for scores. We used a stock clocked 4870 X2 for apples to apples comparisons of both the final score and also the maximum CPU clock we could run the entire 3D mark suite at.
The boards all fell within 50MHz of one another for outright CPU speeds. The Gigabyte board would not complete 3DMark Vantage with CPU speeds over 5GHz for us regardless of voltage changes; although the overall score per clock rate is very good. We utilized both stock memory sub-timings as set by the BIOS and then tuned each memory sub timing option. In the end, any manual changes we made did not increase stability enough to improve CPU MHz scaling the test boards.
Facebook
Twitter
RSS
52 Comments
View All Comments
spacedude - Thursday, January 7, 2010 - link
Just wanted to comment that I just ordered a EVGA P55 SLI (NOT FTW) from newegg and received a foxconn socket...Though on the forums, the evga reps are insistent that there is no problem with their boards.... Who knows if I even have a revised socket........
ARGHHHHHHH
johnyfriend - Tuesday, November 17, 2009 - link
Saw recently a number of boards from asus and gigabyte with Usb3 and Sata 6gb support.Are you guys planning to include those boards in your upcoming p55 board reviews?groove420 - Saturday, November 21, 2009 - link
The new Gigabyte boards will be designated as "P55A-UD6" for example, along with a "333" designation on the box.The feature that caught my eye on these is that they have been refitted with a LOTES clamp instead of the Foxconn.
They remain fitted with a Foxconn socket apparently though.
Whether the fix for the "hot socket" was just a better clamp, or indeed the socket is a revision as well remains an unknown from what I've gathered.
johnyfriend - Tuesday, November 24, 2009 - link
Think they went with the more afordable way to change the clamps than the entire socket.got to wait and see if it pays out..incase those who are willing to buy decide to dump $$$$$$$$ in thatArbie - Monday, November 9, 2009 - link
"Be warned the results are geared more towards benchmarking fanatics and are not in any way indicative of your everyday web browsing PC needs... "Is this a benchmarking fanatics website? Or is it aimed at folks who want high-performance gear for day-in, day-out use? I am in the latter group, which is why I visit AnandTech practically every day. But I won't even bother clicking through a report like this.
In fact, probably only 0.1% of your readers are going to build on the edge (sub-zero cooling?), and there are plenty of websites for them. I'd rather see the same time and effort spent on something more relevant to the other 99.9%.
My opinion...
dingetje - Monday, November 9, 2009 - link
fail troll, stop whining or go to tomshardwarematthewfoley - Tuesday, November 10, 2009 - link
I happen to agree 100% - I am interested in the high-performance gear for day-in, day-out use idea.Anybody who wants Lynnfield for breaking OC benchmarks is wasting their time.
dia - Tuesday, November 10, 2009 - link
99% of the articles here are for regular users. This happens to be an article that is not for everyone. So what's the big deal if the minority audience occasionally gets a hearing every now and again? When I see articles like this going up every single week I might start to ask questions, but not before that.AstroGuardian - Wednesday, November 11, 2009 - link
Guys and gals,This article is 100% for everyone despite what other ppl say.
You are totally missing the point of this post. This post is not about manufacturers and main boards. This post is about P55!!!
I am sure everyone (including benchmark fanatic) would like to hear about P55's capabilities. This article says about P55's abilities and gives insight about possible scenarios when pushing the P55 to its limits.
So what do you want to say? Do you criticize this site or what? Not all of you are IT professionals. As a matter of fact so few of you are IT professionals. And as professionals you musk know as much as possible about your area of expertise. I would like to know everything Anandtech has to say about everything. That's the beauty of it
cyclo - Wednesday, November 11, 2009 - link
+1. I rarely overclock myself but I still am interested in what the capabilities of this CPU/chipset combo are. I like seeing systems pushed to their limits until weaknesses become apparent. Extreme overclocking in my opinion is like stress testing... if there is any weakness in a design overclocking can expose it. In this case it could be the Foxconn socket, the lesser number of pins on the CPU itself (compared to previous gen i7s), the interface, or all of the above.